Carrier V2203-DI (26--00128) - Manual (Page 29)

2--3 62--11362
2.2.3 Cylinder Head And Valves
2.2.3.a Valve Cover
1. Remove the breather hose (2).
2. Remove the valve cover bolts (1).
3. Remove the valve cover (3).
When Reassembling
Check to see that the valve cover gasket (4) is in good
condition and in place.
Tightening
Torque
Valve Cover
Bolts
6.87 to 11.2 N . m
0.7 to 1.15 kgf . m
5.07 to 8.31 ft--lbs
1. Valve Cover Bolt
2. Breather Hose
3. Valve Cover
4. Valve Cover Gasket
5. Breather Valve
6. Plate
2.2.3.b Injection Pipes
1. Loosen the bolts on the pipe clamps (1).
2. Detach the injection pipes (2).
When Reassembling
Blow out any debris that may be in the pipes.
Tightening
Torque
Injection Pipe
Retaining
Nut
15 to 24 N . m
1.5 to 2.5 kgf . m
11 to 18 ft--lbs