Heli-Max HMXE0828 - Manual (Page 8)

8
®
GETTING THE MODEL READY TO FLY GETTING THE MODEL READY TO FLY
INSTALL BATTERIES IN THE TRANSMITTER
Remove the battery cover from the
back of the transmitter and install
e i g ht “A A” b at ter i e s i nto t h e
trans mit ter. D ou b le - c he c k the
polarit y of each batter y before
replacing the battery cover.
CHARGE THE FLIGHT BATTERY
Plug the wall power supply into any
110V standard outlet. Plug the
remaining 4mm plug into the side of
the charger box.
The center front panel LED will light
letting you know the charger has power.
Plug the helicopter’s power battery into
the open connector of the charger. The
charger will beep twice letting you know
the battery is connected.