Heli-Max HMXE0828 - Manual (Page 17)

17
REMOVING THE TAIL BLADE
Hold the motor firmly and pry the tail blade off using your fingernail or small, flat
blade screwdriver. Use your finger to press the new blade in place. NOTE:
When reinstalling, do not force the blade tight against the motor.
REMOVING THE LANDING GEAR
A total of 6 screws hold the battery tray/
landing gear in place. Using the supplied
screwdriver remove the 6 screws.
REMOVING THE MAIN GEAR AXE SS
After removing the landing gear, use the supplied screwdriver to remove the
screw that holds the main gear in place. Slide the main gear away.