GME G142CFD - Manual (Page 25)

PA G E 2 6 I N S T R U C T I O N M A N UA L G - C O M B O
To find a waypoint from the waypoint window:
1 Press MENU and select Find.
2 Press , , or to find a waypoint name.
3 Select ENT.
3 Select ENT
3-8-6 Sort Waypoints
To change the order of displayed waypoint list:
1 Press MENU and select Sort by.
2 Select a sort type.
3-8-7 Deleting all waypoints
1 In the waypoints window, press MENU and select
Delete all.
2 Select Yes.
3-9 Routes
A trip from one place to another often involves several course
changes requiring a series of waypoints which you navigate to,
one after another. The sequence of waypoints leading to the
final destination is called a route. The unit can automatically
advance to the next waypoint on a route, so you do not have
to change the destination waypoint repeatedly.
The unit has the capability to store 100 routes with maximum
of 100 waypoints each.
To display the Routes window, press PAGE and select the
Routes window.
3-9-1 Managing a route from the chart window
Creating a new route window
1 Press MENU and select New route.
2 Enter the new route name using cursor key and press ENT .
3 On the chart window, move the cursor to the position of the
starting waypoint in the Route and press ENT.
4 Move the cursor keys to the position of next waypoint and
press ENT.
5 Repeat step 4 to enter more waypoints.
6 Once the last waypoint has been entered, press MENU and
select End.