Philips VR727 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

How do 1 record from a satellite tuner
You can also programme recordings from an external sat
ellite tuner.
:iE>o:ERNiaOli.Make
O
Connect the tuner to the socket i
sure that the tuner is switched on and that the correct
SAT channel has been selected.
O Use one of the three available programming methods to
programme a TIMER. Use programme number 'E 2' in
the programming procedure for this external recording
source.
Note:* If you use 'VIDEOplus+ programming' for such an
'external' satellite TV programme, the video recorder auto
matically selects 'E2'.
The error message 'VP UNKNOWN' can be ignored.
How can I check or correct a TIMER block?
O
Press button
k
SXIMET
r
,jfCR„0Jii:J on the remote con
trol.
O Use button liiS or -iniito select the TIMER block that you
wish to check or correct.
O Now press button iiiJJJMEfTJZiPlRj® several times.
The recording date, the programme number, the start
time and the end time will be displayed one after an
other on the video recorder.
You can change alj. data with button lis or kzs or with
the digit buttons .
You can select between daily/weekly/date programming
with button ilLSELK?U..i, during step 'DATE'.
O
Finally, press button S;JjiMER,..VCEAJS^^ If you
have made any corrections, the data is now up to date.
Notes: * By following the above instructions, you can not
only check any programmed TIMER block but also pro
gramme a new block.
To do this, select a free TIMER block. Enter the data as out
lined in step
O
■ Durjng.the^programme number' step, you
can also use button ii;LSELECX,Lii to programme the record
ing mode 'SIMULCAST' or 'AUDIO ONLY'.
* Daily programming can only be used for recordings to be
made Mondays to Fridays inclusive.
* Daily/weekly programming can only be used up to one
week in advance.
How can I cancel a TIMER block?
O
Press button !mJiMER_VCFL®Jilon the remote con
trol.
O Use button Sx or i~ i to select the TIMER block that you
want to cancel.
O
Press button i.CLEAEi and the TIMER block is can
celled. The display on the video recorder will show, e.g.:
1
op p p
TIMER 1
1
/ ' / _ / _
27