Philips VR727 - Manual (Page 14)

Direct channel storage
O Switch on the TV set and select the programme number
for the video recorder.
O Switch on the video recorder with button IlSJOPjii.
O Use the rotary control itSSi to select the programme
number under which you wish to store the TV channel.
О
Press button i-iStOBliJ.
A flashing channel number will be displayed:
p 3
I
C T n о c
_/ I /_f /' /_
I /
-r Z l ~ l
-L i_ I
^ у / I \ \
Use the rotary control -i“ 0.1 i or the digit buttons sQ-Si; on
the remote control to select the desired channel number.
If this TV channel is encoded and the video recorder is con­
nected to a decoder, press button iiiL.SELECX..!.;; (remote
control). The display will show 'DECODER'.
From now on, the video recorder will activate the decoder
function for this TV channel (= this 'programme number').
O A TV channel now appears on the TV screen.
Have you used an AV-Euro-cable to connect the video re­
corder to the TV set and does your TV set respond to a
switch-over with button LiIViP.NITO.R.ili (remote control)? In
this case, you can now switch to and fro between TV recep­
tion and video recorder reception. This is the easiest way
for you to assign the same TV channels to the same pro­
gramme numbers on both appliances.
When you have found the right TV channel, store it with
buttonSTORE iJ.
О
Now you can give the TV channel a name (e.g. 'BBC 2')
or change the present name. This TV channel name will
appear in the display whenever you select this TV chan­
nel.
If you do not wish to give a name, go directly to step
p
1' г n n
L- /VI/ I/ //_ L L 1
Use the remote control to enter the name. Proceed as fol­
lows:
* Press button L+i-i or i to select the desired numbers or
letters.
* By pressing button i..j..SELECT .i. iyou can choose the posi­
tion where you want to place the character (up to 5 char­
acters are possible).
* By pressing button LiPLEAR.i [you can reset the chosen
position to a 'blank space' or delete the contents.
О
Press button iiSXQ.R.I IJ on the video recorder.
O
For your convenience, witrh the first four programme
numbers we have stored the correct 'aerial code' for
VIDEOplus+ programming. Ignore the following sen­
tence and store directly at step O •
For other programme numbers use digit buttons 0-9 ,
to select the correct aerial code for VIDEOplus+.
Clear it with button CLEAR L;. See appended list.
O
Store with button Li.SXQRE.L:.
0 Repeat steps O to O until you have stored all the TV
channels that you want.
12 iCl