Futaba 4PKS 2.4GHz - Manual (Page 86)

Front side only
4WS OFF
Same phase Reverse phase Rear side only
86
Fu
n
c
tio
n
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:
s3ELECT
button
* b l i n k s a t t h e c u r r e n t
setup item.
This function can be used with crawlers and other 4WS type vehicles. It is mixing that
uses the 1st CH to control front side steering and the 3rd CH to control rear side steer-
ing.
OFF (front side only), reverse phase, same phase, rear side only, and other 4WS type
switching is used by selecting SW1 or SW2 with the function select function (page 88).
4WS Mixes "S-MIX" (Steering, 3rd channel system)
4WS Mixes 4WS) S-MIX
Setup items
MODE
4WS Type
RATE 3ch rate (Rear side)
MXMD Mix mode
The display is different depending on
the type selected with MODE. The
figure shown below is for the 4TYP.