Futaba 4PKS 2.4GHz - Manual (Page 114)

Connect the communication
port of both T4PKS with the
optional DSC cord.
Communication port (interior
left side)
Cover
DSC cord for T4PKS (option)
114
Fu
n
c
tio
n
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:
s3ELECT
button
* b l i n k s a t t h e c u r r e n t
setup item.
(Preparation)
- Connect the communication port of both T4PKS with the op-
tional DSC cord.
1
Set the power switch of both T4PKS to the display (DISP
ON) side.
Use the (JOG) button and (+) button to display the "DT-TRN"
at both T4PKS.
Using the Data Transfer function
When the "DT-TRN" menu
is selected when the trans-
mitter power switch is at
the transmit (PWR ON)
side, the message shown
below prompting you to set
the switch to the display
side is displayed.
Data transfer side
Data receive side
Data Transfer "DTTRN"
This function copies the T4PKS model memory data to another T4PKS. Connect the
communication port of both T4PKS with the optional DSC cord. Use with this function
with the T4PKS power switch at the display side.
Data Transfer "DTTRN"
s3ELECT button
* blinks at the current setup item.