Futaba 4PKS 2.4GHz - Manual (Page 81)

81
Fu
n
c
tio
n
(Preparation)
- Use the function select switch function to select the switch.
(page 88)
1
(Neutral brake rate)
Select the setting item "NT-BRK" by (JOG) button up or down
operation. Use the (+) and (-) buttons to set the neutral brake
rate.
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
Neutral Brake function adjustment
The ESC neutral brake function and T4PKS neutral brake function can be used simul-
taneously. However, when setting is difficult to understand, we recommend that only
one neutral brake function be used.
Reference
1
(Throttle mode selection)
Select the setting item "MODE" by (JOG) button up or down
operation. Select "F50/B50" or "F70/B30" by (+) or (-) button.
"F50/B50" =Forward 50% : Back50%
"F70/B30" =Forward 70% : Back30%
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
Selecting the throttle mode
Throttle mode (MODE)
F50/B50, F70/B30
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
Throttle Mode "THMOD"
When the neutral brake function is " ON " , the neutral brake rate (RATE) adjustment
is automatically assigned to the throttle trim (DT1/2/3 or DL1/2/3).
Dial / Trim Setting
Throttle side EPA function, or ATL function setting also affects neutral brake side op-
eration.
Effect of set value of other functions on neutral brake