Futaba 4PKS 2.4GHz - Manual (Page 102)

102
Fu
n
c
tio
n
(Opening Screen)
MENU 1
Press t he button
Calling the setup screen
(Opening Screen)
MENU 2
DIRECT SEL
*Calling from menu screen
Press the button set
at this function.
MENU1/2 selection
by
button
Menu screen call
by
button
Select the function
by
button
Press t he button
* W h e n t h e d ire c t c all but to n
is set, the setup screen is also
called by the following method:
s3ELECT
button
* b l i n k s a t t h e c u r r e n t
setup item.
Copy mode
First select the copy model
at the “MODE” item. This
figure shows the single
(SINGLE) copy screen.
"SINGLE"
"GROUP"
"MENU COPY"
"SW/DIAL COPY"
Model Copy "M-COP"
The contents of the model memory can be copied to another model memory.
Single mode (SINGLE) and group mode (GROUP)
Single mode copies the data to another model in model units.
Group mode groups M1~M10, M11~M20, M21~M30, and M31~M40 into individual
groups and copies the data from group to group. For example, it is a convenient function
in order to batch copy the data of M1~M10 to M11~M20.
Menu copy (MENU COPY) and switch/dial copy (SW/DIAL COPY)
Menu copy copies the menu type selected by menu selection (page 38, 105) or a custom-
ized menu and direct menu. Setting data is not copied. It is a convenient function in or-
der to copy only menus without changing the setting data of a model.
Switch/dial copy copies the operation functions set by function select switch (page 88)
and function select dial (page 90) . Setting data is not copied. It is a convenient function
in order to copy only the function select switch and function select dial set by model.
Current model # and model name
Copy destination model # and
model name
Model Copy "M-COP"