Futaba 4PKS 2.4GHz - Manual (Page 117)

117
Fu
n
c
tio
n
Adjuster "ADJST"
Internal checks are performed automatically and when each
adjustment point is in a fixed range, correction is performed
and "SUCCESSFUL!" (figure at the right) is displayed.
If an adjustment point is not within a fixed range, an error is
displayed (figure at the right) and the correction data is not
updated.
4
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
(Preparation)
In the state in which the throttle side is selected, select the ad-
justment screen by pressing the (SEL) button.
1
(Throttle neutral adjustment)
In the neutral setup screen (figure at the right) state, lightly
pull the throttle trigger and then press the (JOG) button in
the state in which the trigger is not being touched.
2
(Throttle throw adjustment)
In the throw setup screen (figure at the right) state, lightly op-
erate the trigger fully to the brake side and forward side and
press the (JOG) button.
3
(Correction execution)
At the check screen (figure at the right), and press the (+)
and (-) buttons simultaneously. Internal checks are performed
automatically, and when each adjustment point is within a
fixed range, correction is performed and "SUCCESSFUL!"
(figure at the right) is displayed.
If an adjustment point is not within a fixed range, an error is
displayed (figure at the right) and the correction data are not
updated.
4
When ending setting, return to the initial screen by pressing
the (END) button twice (for function menu screen, press the
(END) button once).
Throttle adjustment