] printer, 014 0] data length and parity, 025 0] data length and parity – Flintec FT-15D User Manual
Page 37: 015 0] checksum, 026 0] checksum, 040 x] ticket format, 041 x] date and time, 042 x] vehicle id, 043 x] id1, 044 x] id2
FT-15(D) Technical Manual, Rev. 1.02 August 2010
Page 37 of 52
[024 00] Serial Mode (for serial interface 3 only)
0 : RS232C (if par.[012] ≠ 2)
1 : RS-485
2 : 20 mA CL ASCII
[014 0] Data Length and Parity
respective
[025 0] Data Length and Parity
0 : 8 bit, no parity (default)
1 : 7 bit, odd parity
2 : 7 bit, even parity
[015 0] Checksum
respective
[026 0] Checksum
0 : Checksum byte disabled (default)
1 : Checksum byte enabled
[04-] Printer
If one of the serial interfaces is selected as printer, the label settings will be made in this sub-block.
[040 X] Ticket Format
1 : Strip printer
2 : 80 column dot matrix printer
3 : Ticket printer format (e.g. Epson TM-U295)
Note: The terminal transmits the indicated weight value, if it receives the command “ASCII P” in instrument ready
status. This value will be stored to the alibi memory.
[041 X] Date and time
0 : no, don’t print
1 : yes, will be printed
[042 X] Vehicle ID
0 : disable
1 : vehicle ID will be printed in first, transit and preset vehicle weighing cycles
2 : vehicle ID will be printed in second, transit and preset vehicle weighing cycles
[043
X] ID1
respective
[044 X] ID2
0 : disable
1 : ID will be printed in first weighing cycle
2 : ID will be printed in second, transit and preset vehicle weighing cycles
Warning:
The code / alphanumeric data table should be loaded into the ID memory via serial interface to print the
alphanumeric data of the ID.
[045 ] First Weighing Tticket
0 : no, don’t print
1 : yes, will be printed
[047
X] Reprint Ticket
0 : No
1 : Ticket as set up
2 : Ticket with header “Reprint”
[048
0] Space on the left
This parameter is used for adding space (up to 9 characters) on the left side of the ticket. Parameter range is 0 to 9.
[049 XY] Line Feed
X = 0, 1, 2…9
Number of empty lines at the top of the label (numerical key entry)
Y = 0, 1, 2…9
Number of empty lines at the bottom of the label (numerical key entry)
[04A X] Form Feed
0 : No form feed
1 : Form feed after printing (select this setting for ticket printers)
[04B X] Quantity of Copies
X = 0, 1, 2…9
Number of tickets to print for each weighing
[04C XX] Back Feed
XX : 0,1,2….99 : Enter the number of the back feed