Flintec FT-15D - Manual (Page 19)

FT-15(D) Technical Manual, Rev. 1.02 August 2010 Page 19 of 52
6.3 Transit Weighing
In this vehicle weighing procedure the vehicle will be weighed only in a transit. There is no net weight
computation.
Steps Vehicle Position Description
There is no vehicle
on the weighbridge.
(Unloaded Scale) If the indication is not 0 kg, press the
key before loading the scale in the
instrument ready status. [ 0 kg ]
Vehicle is parked on
the scale and the
engine is stopped. Load the scale.
[ 28680 kg ]
Press the key to start
the weighing cycle.
[Trans ]
Message will be displayed for 1 second.
[ V. Id ]
[
584 ]
Enter the vehicle ID numerically, if this
entry is defined (refer to parameter [042]).
Press the key.
[ Print ]
[
28680 kg ]
If the vehicle has finalized the weighing
process, press the key to save and
print the transit weighing ticket.
[ Unload ]
[
28680 kg ]
Message appears until the scale gets
unloaded.
Vehicle is on the
scale + the
displayed weight is
stable.
Vehicle leaves the
scale. Unload the scale. [ 0 kg ]
If the displayed weight is less than 20e or
the key is pressed, FT-15 returns to
the instrument ready status.