Additional information for electrical connection – EVCO EPV4TBR Hardware manual User Manual
Page 9
Evco S.p.A.
Vtouch | Hardware manual ver. 1.01 | Code 114VTOUHWE01
page 9 of 22
The maximum length of the connecting cables of the power supply is 10 m (32.8 ft).
In the models with not isolated power supply, this must galvanically be isolated from the one of the other devices connected in the
network.
3.2. Additional information for electrical connection
-
do not operate on the terminal blocks with electrical or pneumatic screwers
-
if the interface has been moved from a cold location to a warm one, the humidity could condense on the inside; wait about an hour before
supplying it
-
test the working power supply voltage, working electrical frequency and working electrical power of the interface; they must correspond
with the local power supply
-
disconnect the local power supply before servicing the interface
-
do not use the interface as safety device
-
for repairs and information on the interface please contact Evco sales network.