Additional information for installation – EVCO EPV4TBR Hardware manual User Manual
Page 7
Evco S.p.A.
Vtouch | Hardware manual ver. 1.01 | Code 114VTOUHWE01
page 7 of 22
At the front of the interface one can apply the plates CPVP* by Evco (to order separately, made in plastic material and available in two different
colorations, white and black); look at chapter 6 (ACCESSORIES).
2.3. Additional information for installation
-
working conditions (working temperature, humidity, etc.) must be between the limits indicated in the technical data
-
do not install the interface close to heating sources (heaters, hot air ducts, etc.), devices provided with big magnetos (big speakers, etc.),
locations subject to direct sunlight, rain, humidity, dust, mechanical vibrations or bumps
-
according to the safety legislation, the protection against electrical parts must be ensured by a correct installation of the interface; the parts
that ensure the protection must be installed so that you can not remove them if not by using a tool.