Comtrol Multiport Modems Windows 98 - Manual (Page 9)

Installing the Device Driver 9
Installing Software: PCI, Universal PCI, or CompactPCI bus
Installing Software:
PCI, Universal PCI,
or CompactPCI bus Follow these steps to install the Windows 98/SE or ME device driver for use with
PCI, Universal PCI, or CompactPCI bus adapters:
1. Shut down the computer and power off the PC.
2. Install the PCI-bus adapter, following the instructions in the Hardware
Installation Documentation on Page 5.
3. Power on the PC.
Note: The PC should recognize that a new PCI-bus device has been installed
and start the Add New Hardware Wizard.
4. Click Next.
5. Select Search for the best driver for your device (Recommended) and click Next.
6. Select Specify a location and use the Browse option to find the directory
containing the driver files that you extracted in
Extracting the Installation
Files on Page 8.
7. Click Next and Windows locates the driver.
8. Click Next to continue.
9. Click Finish.
Note: You may be required to re-enter the source directory. Do so until it no
longer requests the source directory.
10. After the install wizard has finished installing the driver software, right-click
on the My Computer icon and select Properties.
Alternately, select Start > Settings > Control Panel and double-click the Systems
icon.
11. Select the Device Manager tab.
12. Double-click the Multi-function adapters option:
13. Select the RocketPort/RocketModem device and click Properties.