Comtrol Multiport Modems Windows 98 - Manual (Page 33)

Comtrol Tools 33
Comtrol Tools
The following utilities are installed with this Comtrol driver:
• Test Terminal (wcom32.exe) - Use this utility to troubleshoot communications
on a port-by-port basis (see Using Test Terminal on Page 34).
• Port Monitor (portmon.exe) - Use this utility to check for errors, modem
control, and status signals (see Using Port Monitor on Page 38). This utility
also provides you with raw byte input and output counts.
• RocketModem Reset - Use this utility to reset individual RocketModems or all
RocketModem boards to their default (power-on) states (see Using
RocketModem Reset (rktreset.exe) on Page 44). This utility requires that
RocketModems are installed and designated as RocketModem boards using
the RocketModem Configuration option (see
RocketModem Reconfiguration on
Page 27) before you can use this utility.
Note: If you are using a device driver for the Windows 98/SE or Windows ME
operating system, you may need to download and install these utilities.