Comtrol Multiport Modems Windows 98 User Manual
Page 23
Installing Modems and Adding Serial Printers
23
Installing a Modem
5.
If necessary, select Don’t run the Hardware Installation Wizard.
6.
Check the Don’t detect my modem... box and click Next.
Note: Do not use the auto-detect feature. The Windows modem auto-detect
function does not recognize ports above COM10, and it scans down,
beginning with the highest detected COM port. This can produce
extremely confusing modem-to-port numbering and naming sequences.
7.
Select the appropriate manufacturer and model and click Next. If the correct
manufacturer and model do not appear on the list, click Have Disk to install
software from a manufacturer-supplied installation diskette or browse select a
path where the installation files for the RocketModem are located.
Note: Windows 98/SE and ME only support the Comtrol RocketModem II
V.90 and Comtrol RocketModem III V.90 modems.