Comtrol Rocket Port - Manual (Page 34)

38 - Configuring COM Port Properties RocketPort Series/RocketModem IV Driver User Guide: 2000564 Rev. A
Device Driver Configuration
Clone: Apply all the
settings to all ports
Default = Disabled
If this check box is not clicked, changes apply to the selected
port only.
If this check box is clicked, changes apply to all ports on
this board.
Use Fast (Low
Latency) Data
Transfer
( RocketPort
EXPRESS/INFINITY )
Default = Disabled
Use this option when you need to send or receive a small
block of data on RocketPort EXPRESS/INFINITY adapters.
User-Friendly Port
Name You can enter a custom COM port name to identify this
RocketPort in the Comtrol Drivers Management Console.
COM Name
The COM Name drop list allows you to renumber this COM
port. If you see a COM port number followed by (in use),
this means that Plug and Play sees those COM port
numbers in use by another device.
If you rename the port to a COM name used by another
port, a dialog appears indicating that the port is already in
use.
Defaults
Default = Disabled
Click the Defaults button to return to the driver default
values.
Port Settings
General Tab
Description