Comtrol Rocket Port User Manual
Page 14
20 - Installation Setup Wizard
RocketPort Series/RocketModem IV Driver User Guide: 2000564 Rev. A
Device Driver Installation
13. Click Proceed.
Note: The RocketPort and RocketModem (Universal PCI) Driver Package is
displayed as RocketPort and the Device(s) display as RocketPort and
RocketModem Boards.
14. Click the Launch Comtrol Drivers Management Console button.
15. Return to the Installation wizard and click Close to exit the wizard.
16. Go to
Configuring COM Port Properties
on Page 35 to configure the COM port
properties for RocketPort adapters or see
Verifying and Testing RocketModem
on Page 35 to verify the RocketModem IV installation.
17. If desired, go to
on Page 33 to set up advanced
device properties (device name and starting COM port number).
After driver installation and configuration, connect the serial devices to the ports.
For information about the RocketPort connectors, refer to the appropriate User
Guide (Page 7).