Comtrol DM AIR - Manual (Page 41)

Updating Firmware DeviceMaster AIR User Guide: 2000365 Rev. C - 41
Using the Updater Utility (SocketServer and Bootloader)
Using the Updater Utility (SocketServer and Bootloader)
After you have installed the RTS Updater Utility, use the following procedures to
update the Bootloader or SocketServer firmware.
Installing the RTS
Updater Utility If you do not have the RTS Updater Utility installed, you can install from the
Comtrol CD shipped with your product or download the latest version from:
http://support.comtrol.com/download.asp?partnumber=1800165 .
Note: Windows 2000, Windows XP, and Windows Server 2003 users can use
PortVision Plus. The RTS Updater Utility mainly supports Windows NT.
Use the following procedure to install or update the RTS Update utility.
1. Unzip the 1800165#.exe file if you downloaded or unzip the utility from the
Comtrol CD, which automatically starts the Installation wizard.
where # represents a file version, such as, A or B
2. Follow the Installation wizard.
Upload Procedure Use the following procedure to update the Bootloader firmware on the
DeviceMaster AIR.
1. Verify that you have the .bin file and RTS Updater utility discussed in
Preparing to Update Firmware on Page 39.
2. From the Start button, select Programs>Comtrol Utility>DeviceMaster RTS
Update Utility>dmrtsupd.exe.
3. Enter IP address of DeviceMaster AIR that you want to update.
4. Go to the appropriate discussion to update the firmware:
• Bootloader on Page 43
• SocketServer on Page 42