Comtrol DM AIR - Manual (Page 17)

Hardware Installation and WLAN Configuration DeviceMaster AIR User Guide: 2000365 Rev. C - 17
Configuring an IP Address (Static or DHCP)
6. Select Continue.
7. Close the web browser.
8. If necessary, reset your computer’s IP address back to its original values.
9. Ping the new IP address and verify that it responds.
10. Remove the Ethernet cable from the network port and use the appropriate
procedure for your environment:
• 1-Port Serial Device Server Connection on Page 18
• Ethernet-to-Wireless Bridge Connection on Page 19