Comtrol DM AIR User Manual

Page 12

12 - DeviceMaster AIR User Guide: 2000365 Rev. C

Hardware Installation and WLAN Configuration

Connecting the Hardware and Initial Configuration

13. To configure the DeviceMaster AIR to operate in Infrastructure mode

(default), use the following procedure.

Note: See

on Page 14 if you want to configure the DeviceMaster

AIR to operate in Ad Hoc mode.

Infrastructure Mode

Infrastructure mode requires an access point or wireless router for operation.

Enter the SSID for the access point.

Select Site Survey to select a wireless network.

Note: Optionally, you can enter the MAC address of the access point or

wireless router and skip to

Select the appropriate network and Connect.

Your site may have multiple networks available.