Toshiba TEC MA-1100-100 SERIES - Manual (Page 27)

I PICK UP BALI PICK UP BALANCE KEY
This key should be installed in place of the I PB+i key if the
"Customer File" option is selected. By entering the Customer File
Code before depressing the I PICK UP BAL I key, the previous balance
will automatically be recalled and printed from the Customer File
memory and the operation will go into a charge posting mode.
The [HI may be operated to add a percent rate to the previous balance
registered through the I PICK UP BALI key. The I ITEM CORK I key can
delete the previous balance just entered through the I PICK UP BAL1
key.
The [PICK UP BAL I key may operate at the top of the sale or any time
during the sale; however, unlike the 1PB+1 and 1PB-1 keys, it can
only operate only once in the sale.
CODE OPEN CUSTOMER FILE CODE OPEN KEY
This key should also be installed in place of the IPB-I key if the
"Customer Track" option is selected. By entering a new code (Customer
File No.) before depressing this key, the new Customer File No. will
be opened and assigned to the new customer for the following charge
posting operation. If the I ITEM CORRÍ is operated immediately after
opening a new File No, through the 1 CODE OPEN I key, the File No. will
be closed.
If certain Customer File Codes have been opened in the "CUSTOMER FILE
CODE OPENING" operation in the "SET" mode, entering one of those codes
and depressing the I CODE OPEN I key (for the purpose of opening a new
customer account and assigning the code) will result in an error.
In that case, enter the code and depress the [PICK UP BAL I key. The
new customer account is then started with the balance "0",
This key may operate at the top of the sale or any time during the
sale; however, it can operate only once in the sale.
- 23 -