Toshiba TEC MA-1100-100 SERIES User Manual
Page 111
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONDITION: Any time outside a sale
OPERATION:
STORE NAME/MESSAGE AND COMMERCIAL MESSAGE PROGRAMMING
Mode Lock: MGR
SET
•»I
Line No.
I
I ST I
(1 ~ 3)
or
(1 ~ 7)
Repeat for the next character,
regular-sized
character
-- V I
©/FOR
I-
one double-sized
character
----> IW
f
OR
I I
@/FOR
Entire line with all
double-sized characters
■»I Character Code|->in
(2 or 3 digits;
see the table
on page 113.)
for
spacing
instead
of a character
IAT/TLI
to end each line.
(If any space is
left unprogram-
in the line end,
it will automati
cally be program
med as space.)
NOTES: 1. The
\W\
key after the Character Code entry may be replaced by
the 1#/CID I or ll^/NS I key.
2.
For
one
line,
a
maximum
of
20
regular-sized
characters
or
10
double-sized
characters
may
be
entered.
A
combination
of
both
types is also available.
3.
If "Store Name/Message FIXED" is selected in the system option,
no
data
can
be
programmed
for
the
store
name/message
(and
the
store
name
stamp
will
be
printed
instead);
therefore,
enter
1
through 3 for each line of commercial message.
If "Store Name/Message PROGRAMMABLE" is selected in the system
option,
enter
1
through
4
for
the
store
name/message
and
5
through 7 for the commercial message.
4.
If
no
commercial
message
is
required
on
the
receipt,
program
all
space
for
all
the
three
lines.
Then
no
message
will
be
printed
an
no
extra
line
space
will
be
fed.
If
any
one
of
the
three
lines
is
ever
programmed,
the
two
other
lines
will
remain
programmed with space and will turn out to be extra space lines
to be fed on the receipt,
5. The 4-line space assigned for the store name/message will be
either printed (if programmed) or fed (if all space is program
med), but will never be shortened when a receipt is issued, as
long as "Store Name/Message PROGRAMMABLE" status is selected in
the system option.
- 107 -