Toshiba TEC MA-1100-100 SERIES - Manual (Page 125)

REMOTE
SLIP PRINTER
OPERATION
( optional )
The TEC Remote Slip printer DRS-105 may be connected to the MA-1100-200 series
ECR as an optional device. The Remote Slip Printer will operate printing
if a slip is properly inserted, regardless of the Mode Lock position of the
ECR.
1. The remote slip printer will automatically activate printing when the slip
is properly set to the printer table.
2. No selection is provided for remote slip printer compulsory status.
3 . The following are the optional selections available if the remote slip
printer is connected:
1) PRINTING POSITION
Address #10 Bit 1;
RESET (standard): Prints every item on the right side of the
slip.
SET (option): Prints items of Departments, PLUs, and
Discount on the left side of the slip. Other
items will be printed on the right side.
2) PRINT ITEM SELECTION
Address #10 Bit 2;
RESET (standard): Prints every item as printed on the receipt
as long as the slip is set. ( If only a
certain item is printed and other items
must be skipped, insert the slip just
before the required item and withdraw the
slip before operating other items.)
SET (option): Prints the new balance item of every charage
posting operation. No other items (disregarding
whether a charge posting operation or other
registrations without previous balance) will
be printed on the remote slip even if a slip
is inserted.
3) TOTAL PRINT SINGLE OR DOUBLE SLIP
Address #10 Bit 3:
RESET (standard): Prints the sale total line only once just
as on the receipt. (Single Slip)
SET (option): Prints every sale total line twice with un­
printed lines fed inbetween. (Double Slip)
- 121 -