Getting started, Step one - the remote control, Proceed to step two – JVC AVO56WF30 User Manual
Page 9: Basic operation
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Getting Started
These quick setup pages will provide you, in three easy steps, with the basic information you
need to begin using your new television right away. This information includes basic instructions
on operating your remote control, making a simple cable/antenna and optional VCR connection
and, finally, information on programming your television's Auto Tuner.
If
you have questions, or for more detailed information on any of these steps, please consult
other sections of this manual.
Step One - The Remote Control
The remote control is the key to operating your television's many great features. Before you
can operate your remote control, you first need to install the batteries (included).
Slide
the cover on the back of the remote down towards the bottom of the remote control.
Insert
two batteries (Included) carefully noting the “+” and markings, placing the end in
the unit first. Slide the cover back into place.
Basic Operation
Turn the television on and off
by
pressing the
P
ower
button
at
the top right corner of the
remote.
:pO:WS£R.
ii
Power
Button
■ ••
..‘h •
■
VC
l
. ..........
' ■■■ ■ CM ■■■
Key feature Butto ns
The four key feature buttons at the center of the remote can be used for basic operation of the
television. The top and bottom buttons will scan forward and back through the available
channels. The right and left buttons will turn the volume up or down. These buttons are also
marked with four arrows and are also used with JVC's onscreen menu system. You will need
to use these buttons later In the Quick Setup.
The next step is to connect your television to an antenna or cable.
Proceed to Step Two