JVC AVO56WF30 - Manual (Page 54)

Button Functions
INDEX
This allows you to quickly look at up to 12 channels at a time so that you can decide which one
to watch.
1 2 3 4
5 6 7 8
9 10 11 12
Note: Only RF input signal will be displayed.
POP
you can view three separate pictures (still images) on screen on the right side of the TV’s main
picture. The picture of the still image wii! be renewed in order (from top to bottom).
MAIN PICTURE
SEPARATE PICTURES
To change the channel of separate pictures:
• Press the S elect button and select the separate picture which you want to change. Press
the NUMBER buttons and select the channel.
To display the channel of the separate picture on the full screen:
• Press the S elect button and select the separate picture which you want to display on the full
screen. Press the E nter button.
Note:
• This function will not work when the picture from component terminal or HDCP terminal is
displayed.
• SWAP function will not work.
Cable Box Note:
The 2-Tuner Multi Screen function may not operate when used with certain cable boxes. This
is because while some models of cable boxes may receive up to 181 channels, and may only
send the signal from one channel to your television. (Please refer to diagram on page 14).
For the 2-Tuner Multi screen function to operate correctly, it must have access to all available
channels. Since the television is receiving the signal from only one channel from the cable
box, it is impossible for the 2-Tuner Multi screen function to display a second, different
channel. Because there are many different models of cable boxes in use today, if you are
having problems operating your 2-Tuner Multi screen function feature with your cable box, we
recommend you contact your local cable company for connection advice.
54