Multi screen function, Split, Button functions – JVC AVO56WF30 User Manual

Page 53

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Button Functions

MULTI SCREEN Function

Your Television has three kinds of screen: SPLIT (2 channels). POP (4 channels), and INDEX

(12 channels)

SPLIT

Activate the Split-Screen option by pressing S

plit

on the remote control.

Two channels (or input) will now appear onscreen.
The channel (or input) you were watching before

pressing S

plit

will appear on the left, the new channel

will appear on the right. The sound will continue to
come from the main screen channel (or Input). To turn

Split-Screen off and return to norma! television

viewing, press S

plit

again.

Y:Afd: CiTAdiriiLl

i i:: PiGTURE;

SPLIT-SCREEN

....PICTURE f-

N o t e ; ■ . .

■

■ ; . . . . ;

' . . . .

' . . .

• Split-Screen

functions will not work with locked channels or channels blocked by V-Chip

ratings limits. A grey screen will display instead.

■ .

■ Wjth SPLIT Screen, the picture from the component terminal and HDCP terminal will not

be displayed.

. .: ..

■ . .■

■

• The aspect of MAIN CHANNEL'PICTUBE .becomes. 16:9 when you input the picture of. .

..48.0p, 720pand lOSOi from

the component, terminal .and ..HD.CP terminal. ■ ;

• After you press the

elect

.button,, and select .SPLIT SC.R.E.EN, If

you don’t, operate, the

MAIN CHANNEL .SCREEN, w.ill be. automatically .selected about 8 seconds later.. . . .

SWAP

You can exchange the

channel

(or input) displayed in the

Split

screen window for the main

screen image by pressing S

wap

button.

Note:

This function will not work with POP screen.

FREEZE

Pressing the

reeze

button causes the screen to change to the split-screen display with the

still picture displayed on the right, in order to return to the normal display, press the

reeze

button once again.

Note: This

function will not work with POP screen.

SELECT

With SELECT, you can select the picture (channel) while viewing POP or SPLIT screen. When
you press SELECT button, the channel number on the top will be highlighted. Each press of

SELECT will shift the channel.

ENTER

You can display the one picture on screen by pressing ENTER while using MULT! SCREEN

Function. Press SELECT or highlight the channel number before pressing ENTER.

This manual is related to the following products:

AVO48WP30