Search codes, Remote programming – JVC AVO56WF30 User Manual
Page 25
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Remote Programming
Search Codes
Cable/Satellite Search Codes Function:
1) Slide the 2-Way Mode Selector switch to CATV.
2) Press the TV P
ower
and R
eturnh
- buttons. Hold for at least three seconds and release.
3) Press TV P
ower
, see if the CATV or Satellite box responds.
4) If there was a response, press R
eturn
+. The operating codes are now set. If there was no
response, repeat Step 3. If you repeat Step 3 a total of 52 times without a response, use
the remote control which came with the equipment.
5) Press RETURN+ to exit.
VCR Search Codes Function:
1) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “VCR”.
2) Press the VCR P
ower
and
R
eturn
-)- buttons. Hold for at least three seconds and release.
3) Press VCR
P
ower
,
see if the VCR responds.
4)
If
there was a response, press R
eturn
-)-.
The operating codes are now set. If there was no
response, repeat Step 3. if you repeat Step 3 a total of 80 times without a response, use
the manufacturers remote control which came with the VCR.
5)
Press
R
eturn
-)-
to
exit.
DVD Player Search Codes Function:
1) Slide
the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.
2)
Press the DVD P
ower
and
R
eturn
-)-
buttons. Hold for at least three seconds and release.
3) Press DVD
P
ower
,
see if the DVD player responds.
4)
If
there was
a
response, press
R
eturn
-)-.
The operating codes are now set. If there was no
response, repeat Step 3. if you repeat Step 3 a total of 30 times without a response, use
the manufacturers remote control which came with the DVD player.
5) Press
R
eturn
-)-
to
exit.
25