JVC AVO56WF30 - Manual (Page 24)

Remote Programming
DVD Setup
The remote control is programmed with DVD codes for power on. power off, play, stop,
fast-forward, rewind, previous chapter, next chapter, tray open/ciose, and still/pause operation.
1) Find the DVD player brand from the list of codes shown below.
2) Slide the first 2-way selector switch to “TV” and the other 2-way selector switch to “DVD”.
3) Press and hold down the D isplay button.
4) With the D isplay button held down, enter the first code number listed with the 10 key pad.
5) Release the D isplay button.
6) Confirm the operation of the DVD player.
• If your DVD player does not respond to the first code, try the others listed. If it does not
respond to any code, try the Search Codes Function, on page 25.
• After you program your remote, some DVD buttons may not work properly, if some buttons
do not work properly, use the remote control which came with your DVD player.
: : : : DV Й ■ ■ ■-
Aiwa
■.■■.■■.■■.■■.CODcS..........
043 Raite
.......
033
Apex 040 RCA 021,026
Denon 020, 037 Sampo 034
Hitachi 030, 031 Samsung 030
JVC 000 Sharp 028
Kenwood 035 Silvania 038
Konka 039 Sony
024, 045, 046,
Mitsubishi 025 047
Onkyo 041 Technics 020
Oritron 044 Toshiba 023
Panasonic 020 Wave 042
Philips 023,036 Yamaha 020
Pioneer 022 Zenith 027, 032
24