Quick setup 3, Step three - the plug in menu, The quick setup is complete – JVC AVO56WF30 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Quick Setup 3

Step Three - The Plug In Menu

When you turn your television on for the first time, the Plug In Menu will appear. This menu
sets some of the basic settings for your television. A complete description of the Plug In Menu
can be found starting on page 28. We recommend you complete the Plug in Menu Items

before you start using your television. To begin watching your television right away you only
need to run the Auto Tuner Setup. This lets your television learn the channels it is able to
receive clearly. To run the Auto Tuner Setup, follow the steps below.

PLUG W MENU.:,,

: thiiryt.

SELECT

■

OPERATE BY .cE EXIT BY

Press the AV buttons to move to AUTO TUNER SETUP

Press the ◄ ► buttons to begin AUTO TUNER SETUP

AUTO TUNER SETUP ..

'TUNER MODE h. ; ECABLE-

START | , ;

SELECT BY-
OPERATE BY ;»* .EXIT BY

To choose CABLE (if you are connected to a cable system) or AIR (if you use

an antenna)
To move to START

To start Auto Tuner Setup

The Auto Tuner will now memorize al! of the clear, active channels your television can

receive. This will take roughly one or two minutes.

The Auto Tuner is finished when the message PROGRAMMING OVER! appears on screen.

Your Quick Setup is now complete. You can now begin watching your television, or you can
continue on in this guide for more information on connecting audio/video devices, programming
your remote control, or using the JVC onscreen menu system to customize your television
viewing experience.

The Quick Setup is complete

This manual is related to the following products:

AVO48WP30