Toshiba IK-M41R2 - Manual (Page 8)

2. CONNECTIONS
IK-M41 P2,IK-M41R2
DC Power Supply
-IMPORTANT------------------------------------------------------------------------------------------------------
Before connecting or disconnecting camera cable, be sure to turn the power OFF.
Otheriwise, the camera head may be damaged, which will void warranty.
1. Detach the cap from the camera head, and attach an optional lens.
2. Connect the camera cable terminal of the camera head and the CAMERA terminal of
the ecu with the camera cable (option). (Refer to NOTE 1.)
3. Connect the VIDEO terminal of the CCU and VIDEO IN terminal of the TV monitor with
a video cable. (Refer to NOTE 2.)
4. Connect the cord from the DC power supply to the DC 12V IN terminal of the CCU.
(Refer to NOTE 3.)
5. Adjust the Iris/Focus rings of the lens (option) to get appropriate image.
IK-C41P2
1. Mount the lens on the camera and make the wiring between devices.
Available lens
Use a C-mount lens with its protruded dimensions (L) from the mounting surface less
than 7.0 mm.
— NOTE: ---------------------------------------------------------
• When the lens quantity exceeds 500g, do
U
not fix the lens by using its camera head
/
securing screw holes but keep the lens on
Lens
its lens side.
• The camera is not equipped with the back
focus adjustment mechanism. L
C-mount
Less then 7.0mm