S)' (s, Cautions on use – Toshiba IK-M41R2 User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

O’
(S'
Keep the followings when installing.
•
Do not put the product on a Inflammable material such as carpet or blanket.
•
Do not put the product in a narrow space, since the heat generated from the prod
uct may be difficult to emanate.
• Do not put a inflammable material on the product.
If you do not keep above, the heat generated by the product may cause fire.
Do not put the product in direct sunshine and/or high temperature.
The temperature rise inside the product may cause fire.
Do not put the product In a moist or dusty place such as a bathroom, a place close to
a humidifier, etc.
This may cause fire and/or electric shock.
Do not put the product in a moist, soot and/or dusty place such as a kitchen, etc.
Do not put the product where a soot and steam may occur, such as a kitchen, etc., or
in a dusty place. This may cause fire and/or electric shock.
Do not shoot the sun with the lens and do not put the lens in the place exposed to an
intensive light, such as the sunshine, etc.
Focusing of the light may cause injury of eye and/or fire.
Do not put the product in your mouse and do not swallow it.
This may cause suffocation and/or injury.
Ask your dealer to perform a periodical check and internal cleaning.
Dust inside the product may cause fire and/or trouble. For check and cleaning cost,
please consult your dealer.
Maintenance
Do not use benzine, alcohol and/or thinner, etc. for cleaning. If you use it, painting or
indication on the product may be worn off or deteriorated.
1. Cautions on use
•
Handle the unit carefully. — Do not drop or give a strong shock or vibration. This may
cause trouble. Handling a camera cable roughly may cause the break of cable.
•
Do not shoot intense light. — if there is an intense light at a location on the screen such as
a spot light, blooming and smearing may occur. Do not aim the camera at the sun. If an
intense light enters, vertical strips may appear on the screen. However, this is not trouble.
•
Install the camera In a location free from noise. — If the camera or the cables are located
near power utility lines or a TV, undesirable noise may appear on the screen, in such a
case, try to change the location of the camera or the cable wiring.
•
Handling of the camera head and protection cap. — Keep the camera head and the protec
tion cover away from children. Children may put them into mouth or swallow them acci
dentally. The protection cover protects the image sensing plane when the lens is removed
from the camera head, do not throw away.
• When not using the camera for a long time. — Stop the power supply for safety.
•
When cleaning the camera — Be sure to turn off the power and wipe with a dry cloth. If
necessary, gently wipe with a cloth impregnated with thinned detergent. Do not use ben
zine, alcohol, thinner, etc. If used, coating and printed letters may be discolord and deterio
rated. When cleaning the lens, use s lens cleaning paper, etc.