Toshiba IK-M41R2 - Manual (Page 14)

One-pulse trigger mode setting, Reset/Restart mode setting for trigger input:
The rotary switch S309 is used for the mode setting. Before setting the mode, make sure
to turn the powerof the camera off.
S309 Position Mode
0, 1,2, 3, 8,9 Normal mode
4 One-pulse trigger, SYNC-RESET
5 Trigger input, RR. SYNC-RESET
6 One-pulse trigger, SYNC-NONRESET
7 Trigger input, RR. SYNC-NONRESET
Set internal sync., external sync. (VS/C-SYNC, HD/VD) and reset/restart (HD, RR.VD input)
at NORMAL mode.
Field/Frame accumulation mode:
Set No.1 of S308 to select accumulation/read out mode of CCD output signal.
ON: Frame accumulation
OFF; Field accumulation
Set No.1 of S308 to select field accumulation interlaced mode/frame accumulation inter­
laced mode at trigger input mode of reset/restart.
ON: Frame accumulation interlaced mode
OFF: Field accumulation interlaced mode
Output field designation:
The video output field can be designated by selecting switches No.2 and No.3 of S308.
The setting mode changes depending on the mode.
• Internal sync.
Video output field can be designated. Non-interlaced video image: 1 field (1V)=262H
• Reset/Restart trigger input mode, SYNC-RESET mode
Output the field designated by selecting the switches No.2 and No.3 of S308.
• One-pulse trigger SYNC-RESET mode
Output the field designated by selecting the switches No.2 and No.3 of S308.
• Other mode
Output field cannot be designated. Turn the switches No.2 and No.3 of S308 off.
S308
Video output field
No.2 No.3
ON OFF ODD field
ON ON EVEN field
OFF ON Designation OFF
OFF OFF Designation OFF
14