Using this connection, Connections – RCA VR628HF User Manual

Page 58

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CONNECTIONS

WITH

AUDIO/VIDEO

JACKS

AND

CABLE

BOX

TO UNSCRAMBLE PAY CHANNELS ONLY

This connection assumes:

•

You are using a cable box only to unscramble premium

channels.

•

Your TV has audio/video input jacks.

This connection provides:

•

Stereo sound playback from VCR.

•

Recording a scrambled or unscrambled channel through the

cable box while watching an unscrambled channel.

To use this connection, you must have:

•

(3) coaxial cables

•

(3) audio/video cables

•

(1) splitter

If your cable box is remote controllable:

•

Position it on top of the VCR as shown. Make sure not to
block any of the VCR's ventilation holes.

To connect:

1. Connect cables as shown.

2. Return to First Things First, then follow the steps.

Using This Connection

Tune your TV to its video input channel. Use of TV*VCR button is

not required.

Auto TV/VCR Setting:

•

Set the Auto TV/VCR feature to OFF.

To play a tape:

1. Insert a tape.

2. If necessary, press PLAY.

To record a scrambled or unscrambled program and watch
another unscrambled program:

1. Begin recording a scrambled or unscrambled program

through the cable box using one of the recording features.

2. Select an unscrambled channel on the TV.

VCR

....................

CABLE BOX '

............

T ................

VCR'S

SIGNALS

TRANSMITTERS

WALL

•-t

Position Remote-Controllable

Cable Box

All scrambled channels must be

viewed through the VCR.

For Cable Box Setup, select ALL
channels. See

page 11.