To change the signal type, To add or remove channels, Time and date – RCA VR628HF User Manual

Page 18: Set daylight-saving time, Selecting channels, Setting up the vcr

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

SETTING UP THE VCR

To Change the Signal Type

1. Press MENU-PROG to display the VCR MAIN MENU.

2. Press 4 to display the CHANNELS menu.

3. Press 3 to change the Signal Type between CABLE and

ANTENNA.

To Add or Remove Channels

You may want to add or remove channels after you Auto Channel

Search, especially if some of the channels have weak signals or

you don't want to watch them.

1. Press MENU-PROG to display the VCR MAIN MENU.

2. Press 4 to display the CHANNELS menu.

3. Press 2 to display the ADD/REMOVE CHANNELS screen. Use

CHANNEL up or down or number buttons to go to the

channels you want to remove or add.

ADD/RENOVE CHANNELS

ADD/REMOVE CHANNELS

Channel 115

is presently ADDED

is presently REMOVED

Press CLEAR to remove

Press INFO to add

Press MENU to exit

TIME AND DATE

Before you set the time and date, set the Auto DST (Daylight

Saving Time) feature to ON or OFF for your area.

Set Daylight-Saving Time

1. Press MENU-PROG to display the VCR MAIN MENU.

VCR MAIN MENU

1 VCR Plus+
2 Timer Recordings
3 Time
A Channels
5 Preferences
6 Audio
7 Language

0 Exit

Selecting Channels

The CHANNEL up and down buttons
access those channels active in your
VCR channel list.

You can still access channels not in
the channel list by using the number
buttons on the remote.