RCA VR628HF - Manual (Page 34)

RECORDINC
6. Review the information to make sure it is correct, and then
press MENU«PROG to save.
Program 1 (One Time)
Channe 1 03 Cable
Start Time 08:00 PM
End Time 09:30 PM
Start Date 10/24/97 FRI
Tape Speed SLP
1=SP 2=SLP
Press CLEAR to correct
Press MENU
to save
Program 1 has been saved
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
Press MENU to continue
TIMER RECORDING WITH VCR PLUS+
You can use VCR Plus+ to simplify timer programming if you
have cable TV and don't receive all channels through a cable
box, have a cable box the VCR can control, or if you get your TV
signal off-air.
Setting Up the Channel List
If you did not set up the VCR Plus+ channel list, you can do
it now.
1. Display the CHANNELS menu from the VCR MAIN MENU.
2. Display the VCR Plus+ Channel List menu.
3. Go to Setting U p Y our VC R if you need more information
on setting up your VCR Plus+ channel list.
Using VCR Plus+
1. Press MENU»PROG to bring up the VCR MAIN MENU.
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
5 Preferences
6 Audio
7 Language
0 Exit
2. Press 1 to display the VCR PLUS+ menu.
VCR PLUS +
Enter Plus Code number
(from TV listing)
Press MENU to cancel
VCR MAIN MENU
1 VCR Plus+
2 Timer Recordings
3 Time
4 Channels
CHANNELS
1 Auto Channel Search
2 Add/Remove Channels
3 Signal Type:
CABLE
4 VCR Plus+ Channel List
VCR+ Channel My Channel
5 46
4 —
3 -> -> -> 23
2
1
Use CH+/- to select
Press 0-9 to change
Press MENU to save
VCR Plus+ and PlusCode are registered trademarks of Gemstar Development Corporation.
30