RCA VR628HF - Manual (Page 35)

RECORDING
3. Enter the VCR PlusCode shown in your local television
programming guide.
VCR PLUS+
Enter PLusCode Number
(from TV listing)
12876
Press CLEAR to correct
Press MENU when done
4. Press MENU»PROG to enter the VCR PlusCode number.
How often should this
program record?
1 One Time
2 Daily (every day)
3 Weekdays CM-F)
4 Weekly (Once per week)
0 Cancel
5. Indicate how often you want the program to be
recorded.
Program 1 (One Time)
Channe 1 03 CABLE
Start Time 08:00 PM
End Time 09:30 PM
Start Date 10/24/97 Fri
Tape Speed SLP
Press CLEAR to correct
Press MENU
to save
6. Change the speed with the SPEED button on the remote
or the program end time with the CLEAR button on the
remote (if necessary).
Changing the end time comes in handy when you are
recording a program such as a sporting event that may
exceed the scheduled broadcast time.
7. Press MENU»PROG to save the program.
Program 1 has been saved
Remember to insert a
recordable tape and
turn the VCR off before
the program start time.
Press MENU to continue
VCR Plus+ Recording
Clock must be set correctly.
Insert a tape with the safety tab in
place and enough tape to record the
program.
The output of your cable box appears
in the Channel item of the timer
recording menu if you've set up the
VCR for a cable box for all channels.
The correct channel and start & stop
time will also appear if the VCR is set
up to control the cable box.
UNRECOGNIZED NUMBER... PLEASE
RE-ENTER appears when the VCR does
not recognize the PlusCode number.
PROGRAMS OVERLAP appears if you
have entered two programs where
the times overlap.
The TIMER indicator appears in the
display when you turn off the VCR
and a timer recording has been set. It
flashes if there is no tape in the VCR.
For a cable box the VCR can control,
turn it on before the recording is
to begin.
For a cable box the VCR cannot
control, turn it on and tune it to the
channel you want to record before
the recording is to begin.
31