Jacks and cables, Rf jacks and coaxial cables (f-type), Audio/video jacks and cables (rca-type) – RCA VR628HF User Manual

Page 54: Connections, Connecting your vcr

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

CONNECTIONS

CONNECTING YOUR VCR

Refer to these pages to help you connect your VCR.

JACKS AND CABLES

RF Jacks and Coaxial Cables (F-type)

The RF jacks provide good picture and mono sound quality, and

must be used if audio/video connections are not available for

your TV.

These jacks are required for antenna or cable-TV connections.

The RF jacks on the VCR are labeled IN FROM ANT and OUT TO

TV. The coaxial cable supplied with your VCR is used to connect

the VCR's OUT TO TV jack and your TV's antenna input.

Audio/Video Jacks and Cables (RCA-type)

The audio/video jacks provide very good picture and sound

quality, and can be used if your TV has audio/video input jacks.

These jacks must be used for stereo sound. The VCR audio/video

jacks are color coded (yellow for video, red for right audio, and

white for left audio). If your TV has only one input for audio

(mono), you may need a Y-adapter to hear sound from both

channels.

□

№3

Audio/Video Jack