Operating the auxiliary component, Programming the remote – RCA VR628HF User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PROGRAMMING THE REMOTE
PRO6RAMMIN0 THE REMOTE TO CONTROL
AN AUXILIARY COMPONENT
Your remote can be programmed to operate RCA, ProScan,
and Dimensia brand auxiliary equipment, such as a radio, CD
player, tape player, turntable, amplifier, digital satellite
receiver, or DVD player.
1. Turn on the component to be programmed.
2. Look up your component's code number on the code list.
3. Press and hold the AUX button.
4. Enter the code from the code list.
5. Release the AUX button and press PWR or CHAN up or
down to see if the audio component responds to the
remote commands.
OPERATING THE AUXILIARY COMPONENT
After you have programmed your remote, see which buttons
will operate your component.
1. Point the remote at the component and press AUX. If it
does not turn on, press AUX and then PWR.
2. You may want to experiment to see which buttons will
operate your component. Try pressing buttons, such as
PLAY, REV, and FWD.
AudioA^ideo Codes
RCA/ProScan/Dimensia
AM/FM.... ..........................................
...03
Auxiliary Component......................
...04
CD.....................................................
...07
DVD......... ......................................... ...
10
Phono ............................................
...05
Digital Satellite Receiver................
...08
Tape
1
.............................................
...06
Tape 2 .. ...........................................
...09
s_______________________________
This remote may not operate all
models of the brands that are shown.
B8