RCA VR628HF - Manual (Page 26)

VCR BASICS
REMOTE BUTTONS
Your backlit remote has a light button (@) that glows in the
dark. Press this button to light the buttons on the remote. The
remote buttons remain lit when they are pressed within a few
seconds of each other. When you finish, the light turns off
automatically to conserve battery power.
The remote control is capable of controlling your VCR and many
additional components. Compatible RCA, ProScan, and GE
components work automatically. Other brands may require you to
program the remote.
COMPONENT BUTTONS
AUX Used with PWR button to turn on a compatible RCA audio
component.
PWR Turns off VCR when remote is set to control the VCR. Also
turns some compatible components on and off.
SAT*CABLE Turns on a compatible RCA, ProScan, or GE digital
satellite receiver. Can be programmed to control different brands of
receivers. Used with the PWR button to turn on a compatible cable
box {if programmed) and sets the remote to control the TV.
TV Turns on a compatible RCA, ProScan, or GE TV and sets the
remote to control the TV. Also used with the OFF button to turn
on a different brand of TV (if programmed) and sets the remote
to control the TV.
VCR1 Turns on a compatible RCA, ProScan, or GE VCR and sets
the remote to control the VCR.
VCR2*DVD Turns on a second compatible RCA ProScan, or GE
VCR and sets remote to control the VCR. The remote must be
programmed to control other brands of VCRs. Also turns on and
controls compatible laser disc and DVD players.
VCR FUNCTION BUTTONS
CHAN Up or Down Selects next higher or lower channel in the
VCR's channel memory.
CLEAR Resets time counter to 0:00:00. Allows you to change
entries when setting the clock or a timer recording.
EDIT Signals two properly connected compatible VCRs to begin
copying a tape.
22