Tv with rf jack only, Using this connection, Connections – RCA VR628HF User Manual
Page 56
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONNECTIONS
TV WITH RF JACK ONLY
This connection assumes;
•
You are connecting antenna, cable, or cable box system.
•
Your television has only an RF input jack.
This connection provides;
•
Mono sound playback from VCR.
•
Record one channel while watching another (except
when using a cable box for all channels).
To use this connection, you must have;
•
(1) coaxial cable for cable or antenna connection; (2) for
cable box
If your cable box is remote controllable;
•
Position it on top of the VCR as shown. Make sure not to
block any of the VCR's ventilation holes.
To connect;
1. Connect cables as shown.
2. Return to First Things First, then follow the steps.
VCR
...................
\
'i
CABLE BOX
........... ..
VCR'S \
SIGNALS %
TRANSMITTERS
WALL
'.t
Position Remote-Controllable
Cable Box
Using This Connection
Tune your TV to channel 3 or 4, whichever one you selected
with the 3CH4 switch on the back of the VCR.
Auto TV/VCR Setting:
• Set the Auto TVA/CR feature to ON.
To play a tape:
1. Insert a tape.
2. If necessary, press PLAY.
To record one program and watch another:
1. Begin recording a program using one of the
recording features.
2. Press the TV«VCR button, and select a different channel
on the TV.
52