RCA VR628HF - Manual (Page 27)

VCR BASICS
F.ADV (Frame Advance) Lets you view one frame with each
press of the button when tape is in pause.
FWD (Foward) Fast forwards the tape when the VCR is stopped.
Searches forward through a tape during playback. Starts slow-
motion during play-pause and increases slow-motion speed.
GO BACK Switches between two channels. Select one channel and
then select another using the number buttons. Press GO BACK to
switch between the two channels. In menu mode, press to go back to
previous menu.
INFO Shows the status displays on the TV screen.
INPUT Selects between the line input and the VCR's tuner. Line
input refers to the signal coming from the component connected
to the audio/video input jacks on the back of the VCR.
MENU*PROG Displays VCR MAIN MENU on the TV screen. Used
to select a menu item or exit a menu.
MOVE (Arrow Buttons) Allow you to move through the
menus, enter data, and change settings of selected features.
Numbers (0 through 9) Select a channel up to 99 by pressing
two numbers. Select a cable channel over 99 by pressing and
holding 1 until 1 - -appears on the screen. Then press the other
two numbers.
PAUSE Pauses playback or recording. Press PAUSE again to
return to playback or recording.
PLAY Plays a tape.
PWR Turns off the VCR when the remote is set to control
the VCR.
REC Starts VCR recording. Also used for express recording.
REV Rewinds the tape when the VCR is stopped. Searches
backward through a tape during playback. Starts slow-motion
playback when tape is paused and decreases speed of slow-motion
playback.
SEARCH Displays Index and Go-To Search menus on TV screen
when VCR is stopped. Advances the tape 30 seconds of recorded
material during playback.
SLOW + AND - Used for slow-motion playback. Press + to
increase the speed or - to decrease the speed.
SPEED Selects a recording speed (SP or SLP).
TV Buttons
The TV buttons may not control all
features of all models of RCA,
ProScan, and GE TVs.
23