RCA VR628HF - Manual (Page 15)

SETTING UP THE VCR
3. Press 5 to display CABLE BOX SETUP. Then select one of the
three choices.
CABLE BOX SETUP
Do you U S e your cable
bo X to re ceive ALL
ch anne 1 sor only SOME
Ch annels?
1 ALL cha nnels
2
Only SOME channels
3 Cancel setup
4. If you selected ALL channels, enter the output channel of
your cable box, usually 03, 04, or video line input and
press MENU.
CABLE BOX SETUP
On what channel does
the VCR receive signals
from the cable box?
(usually 3, 4, or Video)
Enter 01-13 or INPUT
Press MENU to cancel
Once you complete the setup, the VCR confirms that the VCR
will now receive all signals on the designated channel.
5. Press MENU*PROG and select whether your cable box is
remote controllable.
CABLE BOX SETUP
Can your cable box be
operated with a remote
control 7
1 Yes
2 No
6. If your cable box is remote-controllable, turn it on and tune it
to channel 2. Press MENU»PROG to continue.
CABLE BOX SETUP
Please turn on your
Cable Box and tune
it to channe 1 2.
Press MENU to conti nue
Cable Box Setup
ALL channels: enter two numbers for
output channel of your cable box or
press INPUT.
Only SOME channels: if you only use
the cable box to tune premium
channels.
Cancel setup: select to cancel.
11