Adjusting stretch stitch balance, Recommendation, Straight stretch stitch – Kenmore 17921 User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ADJUSTING STRETCH STITCH
BALANCE
Stitch modifier should be in neutral (notched)
position for most materials. Depending upon
the type of fabric used, you may need to
adjust this control to match forward stitches
of stretch sewing with reverse motion
stitches. If the stitches are too open, turn the
control slightly clockwise; if the stitches
overlap, turn the control counter-clockwise.
RECOMMENDATION
1. It is recommended you use the Q set for
sewing knit and woven synthetic fabrics.
2. It may be necessary to use an interfacing
or backing when sewing very soft and
thin knits or woven synthetic fabrics.
< ♦-
Rick - Rack Stretch Smocking Stretch
STRAIGHT STRETCH STITCH
SETTINGS
Stitch Selector - =====
Stitch Length - Yellow Zone
Stitch Width - Any number (not necessary
to adjust)
You may use either a zig zag or straight stitch
foot BUT-- for best control of fabric, best
looking straight stitches and best feeding of
fabric use Straight Stitch Foot and Straight
Stitch Needle Plate.
Use this stretch stitch with knit or synthetic
fabric. Sew as you do with regular straight
stitch.
This is also a good stitch to use on curved
seams regardless of the type of fabric. Any
seam that will receive a great deal of strain
when worn should be sewn with the stretch
stitch. Use in children's shorts and slacks as
well as adult sports clothes.
45