Stitch selector aimd indicator, Stitch width control – Kenmore 17921 User Manual

Page 17

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Stitch

selector

STITCH SELECTOR AIMD
INDICATOR

1. To select a stitch, be sure needle is out of

fabric at its highest position. Push the
stitch selector in and out to release the

mechanism.

2. Then turn the selector to left or right until

the required stitch is indicated by the red
light on the indicator panel.

STITCH WIDTH CONTROL

The width of all the stitches produced on this

machine, with the obvious exception of

straight stitch, can be made narrower or
wider by adjusting the stitch width control.

To decrease or increase the width of a stitch,
turn the stitch width control dial from 0 - 4.
The higher the number the wider the stitch.

Recommended setting ranges are indicated

and color-coded with patterns on the stitch

indicator panel.

When sewing with a double needle, do not
use a setting above 2, as indicated on the
dial.