Kenmore 17921 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
GUIDE
Working on wrong side of fabric, fold hem
up. Press and pin in place. Then fold hem
allowance under... leaving %" of hem edge
extending.
Place garment under blind stitch foot with
the fold of the garment against guide and
slide it by turning screw so that the zigzag
just catches the fold. (Blind hemming can be
simplified by also using the special Kenmore
Edgestitcher-please refer to p. 21 for details.)
Now the right side of your garment will show
only the blind stitches ! Be sure to press both
sides of the finished hem !
SHELL STITCHING with blind hem pattern
Stitch Length -
12
Stitch Width -
2-4
This shell-stitched edge is a popular finish for
lingerie and nightgowns. To achieve this
multiple scalloped effect, allow needle to
clear just the left edge of the fabric when it
zigzags.
42