Accessories, Placement of needle, Needles, placement of needle – Kenmore 17921 User Manual

Page 21

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ACCESSORIES

I I I

TPI

Use KENMORE needles. The size of the
needle should conform with the size of the

thread and both should be suitable to the

fabric. Kenmore needles are color-coded by
size for your convenience (See chart on

next page).

Never use a bent needle or one with a dull
point.

The exact length of your needle is shown at
left. Be sure you never use one in your
machine that is not this exact length.

You will find among your accessories a

•Q NKKDLK' -with blue shank. This special

needle is to be used when sewing knits and
certain difficult synthetic fabrics. If you

experience skipped stitches in any of your
sewing, use -Q

nkkdl

K"-and "Q FOOT"..

NEEDLES

PLACEMENT OF NEEDLE

Raise needle bar to its highest position by

turning the hand wheel toward you. Loosen
the needle clamp screw. Holding the needle

with the flat side away from you, slip the
needle into the needle bar. When it is in as far
as it will go, tighten the needle clamp screw

with small screwdriver provided in the
accessory box.

you