beautypg.com

Spool pins and caps, Converting to free-arm sewing, Spool pins and caps converting to free-arm sewing – Kenmore 17921 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

SPOOL PINS AND CAPS

Swing the Primary Spool Pin into position at
the back of the machine as shown above.

Place a spool of thread on the pin and place

the appropriate size spool cap over the
thread.

A second telescoping spool pin is provided
for bobbin winding and for a second thread
when sewing with a double needle. Pull it out
and place a nylon disc over it when using.

CONVERTING TO FREE-ARM SEWING

This machine can be used either as a flatbed

or as a freearm model. With the accessory
box in place, the machine is a flatbed model

with a large working surface, which slopes

gently towards you to help the smooth flow
of fabric.

1. To remove the accessory box, take it

firmly with your left hand and lift it up

until it clicks. Your machine is then ready
for free arm sewing.

By removing the accessory box, the machine
converts into a slim freearm model for sewing

children's

clothes,

cuffs,

trouser

legs,

armholes and other awkward places.

2. To replace, slide the accessory box back

into place until it clicks.

8